Products Categories
Contact Us
Add: No.69, Xikang South Road, Dafeng Economic Development Zone, Yancheng City, Jiangsu Province
Mob: +8615068285212
Tel: +86-577-67354396
E-mail: sale@
Hand Wheel Globe Valve

Hand Wheel Globe Valve

Non-rotating stem with precision Acme threads and burnished finish. Valve suitable for horizontal installation.

E-mail: sale@
Mob: +8615068285212
Tel: +86-577-67354396

Send Inquiry

● Non-rotating stem with precision Acme threads and burnished finish. Valve suitable for horizontal installation. 

● Universal trim. 13Cr stem, 13Cr faced disc, and alloy faced seats API Trim 8 suitable for service up to 850°F (454°C).
● Seat face alloy hard faced, ground, and lapped to a mirror finish. Conical seat machined to 8 RMS.
● Tapered disc.
Body guided disc accurately mates the hard faced surface of the disc with the surface of the seat, hard faced with 13Cr, alloy, SS 316, or Monel, ground and lapped with seat.
● Disc in SS 316 hard faced with alloy also available. NPS 2–6 (DN 50–150) valves may have solid CA15 (13Cr) discs. 
● Body and bonnet.:Castings are precision machined. One-piece bonnet for better alignment, fewer parts.
● Stuffing box finish to 63 RMS or better.
● Body and bonnet joint accurately machined. Fully enclosed gasket.
● Gland has two-piece construction for easy alignment.
● Rotating stem nut. Austenitic ductile iron Gr. D-2C, renewable in-line.
● Torque arm reduces wear on packing rings and enables better sealing and reduces torque.
● Impactor handwheels.

Globe and stop check valves require higher closing torques than gate valves with the same seat diameter and pressure class. The most economical mechanism for tight shutoff is the impactor handwheel. Two lugs cast under the wheel strike simultaneous blows and give 3–10 times the closing force of standard handwheels. Impactor handwheels are supplied at manufacturer’s option unless specified by customer.



Handwheel operated globe valve have backseat threaded in the bonnet, or for the pressure seal valves, welded to the bonnet. The hard facing is stellite 6 or equivalent.

The design of the body-bonnet gasket varies depending on the class of the globe valve.

Class 150 to 600 globe valves consist of a circular male-female connection with a graphite or spiral wound gasket.

Class 900 and above globe valves consist of a ring type joint.

In pressure seal designs the sealing in achieved through a gasket that takes advantage of the internal pressure of the line. The material most commonly used is high-purity graphite being located between the body and the body retainer ring.

Design Features

Design standard as per: BS1873、GB/T 12235

Generally, lift is just 1/4 of the valve seat port, ensuring a short Opening/closing time. 
Only one sealing face exists on the valve body and disc.

The valve is designed as a back seat sealing structure.

Use flexible and woven graphite collaboration type packing.

Product Range

Body material: stainless steel, carbon steel, forged steel, alloy steel

Nominal diameter: 1/2"~24"

Pressure range:Class150~2500

End connection: RF, RTJ, BW

Working temperature:-29℃~560℃

Operation: Handwheel, Gear Box, Electric Actuator, etc.



Valve Type

Handwheel Operated Globe Valve

Valve Material

Cast steel, stainless steel, special alloy, etc

Valve Test

100% quantity tested before delivery

Valve Guarantee

18 months from the date of dispatch ex works, or 12 months from date of commodity installation.

Valve Painting

Customer request

Valve Package

Wooden case


No requirement

Valve Certificate

API 6D/CE/ISO9001/ISO14001

Delivery Detail

Shipped in 4 or 6 weeks after payment



Payment Terms


Certificate Offered

Packing List,Commercial Invoice,Test Reports and Material Certificates,Certificate of quality and quantity, Seller’s Certificate of Guarantee

Hot Tags: hand wheel globe valve, manufacturers, factory, discount, quotation, pricelist
Related Products

24 hours at your service:



  • Jiangsu 3D Valve Co.,Ltd

    Add: No.69, Xikang South Road, Dafeng Economic Development Zone, Yancheng City, Jiangsu Province
    Mob: +8615068285212
    Tel: +86-577-67354396
    E-mail: sale@


    Our company was founded in 1998, covers an area of 33751 square meters, construction area of 15800 square meters. Company has sophisticated valve R & D, design, sales, management and service team


Copyright © Jiangsu 3D Valve Co.,Ltd All Rights Reserved.